Merchandise Description
Item Description:
one.Flexspline is a hollow flanging regular cylinder framework.
2.There is a large-diameter hollow shaft gap in the middle of the cam of the wave generator. The inner design of the reducer has a help bearing.
three.It has a entirely sealed framework and is easy to set up. It is really appropriate for the events in which the wire needs to be threaded from the heart of the reducer.
Benefits:
The first:High precision,substantial torque
The next:committed technological staff can be on-the-go to offer design remedies
The third:Factory immediate revenue wonderful workmanship resilient quality assurance
The fourth:Solution quality problems have a a single-calendar year guarantee time, can be returned for replacement or repair
Business profile:
HangZhou CZPT Technology Co., Ltd. recognized in 2014, is fully commited to the R & D plant of high-precision transmission elements. At present, the yearly creation capacity can achieve 45000 sets of harmonic reducers. We firmly believe in quality initial. All hyperlinks from uncooked resources to concluded items are strictly supervised and managed, which offers a sound basis for item top quality. Our items are marketed all more than the region and overseas.
The harmonic reducer and other substantial-precision transmission components were independently designed by the business. Our organization spends twenty% of its income every year on the analysis and development of new technologies in the industry. There are 5 men and women in R & D.
Our benefit is as underneath:
one.7 a long time of advertising encounter
two. 5-particular person R & D group to provide you with technological support
3. It is marketed at property and abroad and exported to Turkey and Eire
four. The merchandise high quality is confirmed with a one-year warranty
5. Merchandise can be customized
Toughness manufacturing facility:
Our plant has an entire campus The amount of workshops is all around 300 Whether it is from the creation of raw components and the procurement of uncooked resources to the inspection of completed items, we are carrying out it ourselves. There is a complete generation technique
HST-III Parameter:
| Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start off stop | The allowable highest of the typical load torque | Maximum torque is authorized in an quick | Let the optimum speed to be entered | Average input pace is permitted | Back gap | design daily life | ||||
| NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
| 14 | fifty | six.two | .6 | 20.seven | 2.1 | seven.9 | .7 | forty.3 | four.1 | 7000 | 3000 | ≤30 | 10000 |
| eighty | 9 | .9 | 27 | 2.7 | 12.seven | 1.3 | 54.1 | 5.five | |||||
| one hundred | nine | .nine | 32 | three.three | twelve.7 | 1.three | sixty two.one | six.3 | |||||
| 17 | fifty | eighteen.four | one.9 | 39 | four | 29.9 | 3 | 80.5 | 8.2 | 6500 | 3000 | ≤30 | 15000 |
| 80 | twenty five.3 | 2.six | forty nine.five | 5 | 31 | three.2 | one hundred.one | ten.two | |||||
| 100 | 27.6 | two.8 | sixty two | six.3 | 45 | four.6 | 124.2 | twelve.seven | |||||
| 20 | 50 | 28.8 | two.9 | 64.four | 6.6 | 39 | four | 112.7 | eleven.five | 5600 | 3000 | ≤30 | 15000 |
| 80 | 39.one | 4 | 85 | 8.eight | 54 | 5.five | 146.one | fourteen.nine | |||||
| one hundred | 46 | 4.seven | 94.three | 9.six | 56 | 5.8 | 169.one | seventeen.2 | |||||
| a hundred and twenty | forty six | four.7 | one hundred | ten.two | 56 | 5.8 | 169.1 | 17.2 | |||||
| one hundred sixty | 46 | four.seven | 100 | 10.2 | fifty six | five.8 | 169.1 | seventeen.2 | |||||
| 25 | 50 | 44.9 | four.six | 113 | 11.5 | sixty three | 6.five | 213.nine | 21.8 | 4800 | 3000 | ≤30 | 15000 |
| eighty | 72.five | 7.4 | 158 | 16.one | 100 | ten.two | 293.three | 29.9 | |||||
| a hundred | 77.one | seven.9 | 181 | eighteen.four | 124 | 12.7 | 326.6 | 33.three | |||||
| 120 | seventy seven.one | seven.9 | 192 | 19.six | 124 | twelve.seven | 349.six | 35.six | |||||
| 32 | 50 | 87.4 | eight.9 | 248 | 25.3 | 124 | 12.seven | 439 | 44.8 | 4000 | 3000 | ≤30 | 15000 |
| eighty | one hundred thirty five.seven | thirteen.8 | 350 | 35.6 | 192 | 19.six | 653 | 66.6 | |||||
| 100 | 157.six | 16.1 | 383 | 39.1 | 248 | 25.three | 744 | seventy five.nine | |||||
| forty | 100 | 308 | 37.2 | 660 | sixty seven | 432 | 44 | 1232 | 126.seven | 4000 | 3000 | ≤30 | 15000 |
HSG Parameter:
| Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at commence stop | The allowable optimum of the regular load torque | Maximum torque is allowed in an instant | Enable the highest speed to be entered | Typical input pace is allowed | Back again gap | design daily life | ||||
| NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
| 14 | fifty | seven | .7 | 23 | 2.3 | nine | .nine | 46 | 4.7 | 14000 | 8500 | ≤20 | 15000 |
| 80 | 10 | one | 30 | 3.one | 14 | 1.four | 61 | six.two | |||||
| a hundred | 10 | 1 | 36 | 3.seven | 14 | one.four | 70 | seven.2 | |||||
| 17 | fifty | 21 | two.one | forty four | four.5 | 34 | three.four | ninety one | 9 | 10000 | 7300 | ≤20 | 20000 |
| eighty | 29 | two.9 | fifty six | five.7 | 35 | three.6 | 113 | 12 | |||||
| 100 | 31 | 3.2 | 70 | seven.2 | fifty one | 5.two | 143 | 15 | |||||
| 20 | fifty | 33 | 3.3 | seventy three | 7.four | 44 | four.5 | 127 | 13 | 10000 | 6500 | ≤20 | 20000 |
| 80 | forty four | 4.five | ninety six | nine.8 | sixty one | 6.two | 165 | 17 | |||||
| a hundred | 52 | 5.3 | 107 | 10.nine | sixty four | six.five | 191 | 20 | |||||
| one hundred twenty | 52 | five.3 | 113 | 11.five | sixty four | 6.5 | 191 | twenty | |||||
| one hundred sixty | fifty two | 5.three | a hundred and twenty | 12.two | 64 | six.5 | 191 | twenty | |||||
| 25 | 50 | fifty one | 5.two | 127 | thirteen | 72 | 7.3 | 242 | twenty five | 7500 | 5600 | ≤20 | 20000 |
| 80 | eighty two | 8.4 | 178 | 18 | 113 | 12 | 332 | 34 | |||||
| one hundred | 87 | eight.9 | 204 | 21 | a hundred and forty | fourteen | 369 | 38 | |||||
| 120 | 87 | 8.9 | 217 | 22 | 140 | 14 | 395 | 40 | |||||
| 32 | fifty | ninety nine | ten | 281 | 29 | 140 | fourteen | 497 | fifty one | 7000 | 4800 | ≤20 | 20000 |
| 80 | 153 | sixteen | 395 | forty | 217 | 22 | 738 | seventy five | |||||
| one hundred | 178 | eighteen | 433 | forty four | 281 | 29 | 841 | 86 | |||||
| forty | a hundred | 345 | 35 | 738 | 75 | 484 | 49 | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
Exhibition:
Software scenario:
FQA:
Q: What should I supply when I decide on gearbox/velocity reducer?
A: The ideal way is to give the motor drawing with parameter. Our engineer will verify and suggest the most appropriate gearbox design for your refer.
Or you can also supply below specification as nicely:
one) Variety, model and torque.
two) Ratio or output pace
three) Functioning condition and connection method
four) Quality and mounted equipment name
five) Input manner and enter speed
6) Motor manufacturer product or flange and motor shaft dimensions
Gearboxes can be employed in various fields of extensive processing, agriculture, chemical processing, oil and gas, electrical power transmission and distribution systems, logistics, warehousing and other industries. Gear reducers are typically used where larger torque and/or reduce rotational speeds are required, or if electricity demands to be transmitted at alternating angles, these kinds of as in proper-angle motors. It can also modify the route of rotation, as effectively as clockwise and counterclockwise. EP delivers a comprehensive assortment of gear reducers with proper angle worms and substantial efficiency options. Electric powered Equipment Aluminum merchandise are a light-weight and sturdy substitute to present day forged iron and metal types and can be stocked or personalized manufactured to your specific requirements. EP gearboxes are light-weight and resilient, aluminum worm gearboxes are made for tight areas, such as difficult-to-set up OEM designs as nicely as mobile equipment. Eccentric reducers are available as compact aluminum or cast iron inline reducers with seal daily life scores from 15HP (aluminum) to 40HP (solid iron). In addition to our standard and modified standard goods, our engineers will operate with you to design and style and develop custom options for several drive systems to go well with your application needs.
Under is a checklist of our at the moment available industrial gearboxes. If you can’t find what you are looking for, please get in touch with the factory for far more possibilities. At EP, we are continuously establishing new merchandise and retrofitting outdated ones to meet up with consumer needs.
